TOPOLOGY
The topology of the giacoklima® bus system is modular and very easy. The smallest working unit is a KPM20 Unit to which from 1 to 8 Thermostats (K481 or K483) or room Sensors (K485) can be connected through the secondary bus. This configuration allows controlling independently up to 8 rooms and to work out a set of base functions already wide.
If the requirements are higher, for example temporized programs, centralized display or web remote control are desired, a KM20X controller can be connected to the KPM20 Unit through primary bus; the KM202 version permits the connection to a KD200 Display Unit.
If the circuits to be independently controlled are more than 8, the primary bus can be connected to an additional KPM20 Unit, to which other 8 Thermostats (K481 or K483) or room Sensors (K485) can be connected on the secondary bus.
If the requirements are higher, for example temporized programs, centralized display or web remote control are desired, a KM20X controller can be connected to the KPM20 Unit through primary bus; the KM202 version permits the connection to a KD200 Display Unit.
If the circuits to be independently controlled are more than 8, the primary bus can be connected to an additional KPM20 Unit, to which other 8 Thermostats (K481 or K483) or room Sensors (K485) can be connected on the secondary bus.
