Components for domestic water distribution lines

To distribute drinking water, our most precious resource, we provide hygienic and high quality system which meet the highest standards both nationally and internationally. Pipes, connections, manifolds, and shut-off valves: everyone needs to create the perfect system in the construction and restoration of any building. Systems with maximum hygienic safety, reliable and easy to install, to guarantee a long-lasting supply of drinking water.

Overview

Pipes

Flexible pipes for plumbing and drainage, made of multilayer metal-plastic (PEX-b/Al/PEX-b), bare and insulated, or in plastic (PEX-b sheathed, for removable plumbing distribution). Designed to resist corrosion and products in compliance with the strictest standards, to support the effects long-term of high temperatures and the pressure of a drinking water system.

System in PPR

Pipes and connections made in PPR to weld, available also in large diameters. The technical features of the material make it optimal for creating systems to be used for transporting drinking water, even if very chalky, for plumbing and drainage uses.

Connections

The key to the success of a plumbing system are the joints. Our range of connections (to be pressed with multi-tong profile, with mechanical compression) guarantees connections that last a long time and conceal no unpleasant surprises, preserving the value of every house. Compliance with the strictest standards of hygiene and easy of installation are other fundamental features of our fittings.

Manifolds

Distribution manifolds to connect in a single point, easily accessible, all the users to be supplied with drinking water. Various types of products ( (modular, sectional or rod manifolds) to create, using flexible and rapid installations, of a compact and safe system that is easy to maintain.

Ball valves

Indispensable components to create any type of system with flexibility, the brass ball valves suitable for drinking water are made in conformity with the new European regulations for drinking water.

Highlights

Multilayer pipes available in bare version (coils or rods) or with insulation.

Pipes produced not only according to the most modern technologies, but also in accordance with principles of low environmental impact, for the well-being and health of our customers.

Thanks to the extraordinary properties of polyethylene, the pipes are characterised by high flexibility, complete protection against wear and resistance to corrosion. No annoying incrustations form, thereby ensuring a problem-free use also long term. 

Seals that comply with standard EN 681-1 for the distribution of drinking water. 

Connections in brass series RM multitongs. They can be pressed with TH (standard Giacomini), H, U pressing profiles. 

RM connections characterised by: pipe-holder profile chamfered to facilitate the insertion of the pipe. Compression bush in stainless steel, with special flaring to facilitate the insertion of the pipe. double black O-ring seal. Bush-fastener ring in brass with slits to visually check that the pipe has been correctly inserted right down. Divider to avoid corrosive electrochemical phenomena in the contact between the aluminium of the pipe and the brass of the connection. 

Modular manifolds with shut-off cocks equipped with handwheel for easy identification of the user.

Ball valves specific for the distribution of water for human consumption. They are equipped with a ball designed to avoid water stagnating and the possible proliferation of bacteria in the valve. 

Advantages

  • Safety, reliability and protection of health guaranteed over time by all the principal components of the system
  • Warranty of a single manufacturer
  • Reduction to a minimum of the maintenance costs, due to the great reduction in corrosion and incrustation. 
  • Large product catalogue
  • Technical consulting at the company
  • Various plant engineering types available, to meet every demand of the market
  • Complete catalogue for every installation need
  • Continuous updating of the range

 

  • Single contact person for the entire system
  • Extent and depth of the range, to carry out ramifications and changes in diameter without any problem
  • Simplicity and reliability of installation
  • Continuous updating of the range
  • Qualified technical consulting at the company
  • Multi-tong connections make it possible to use equipment possibly already in place

 

Products

Multilayer and sheathe PEX pipes

R999

Multilayer pipe PE-X/Al/PE-X for heating/cooling systems

R999I

Multilayer pipe PE-X/Al/PE-X with insulation

R993

GIACOFLEX pipe, PEX-b made, blue sleeve

R994

GIACOFLEX pipe, PEX-b made, red sleeve

PPR system

H100

PP-R pipe 4 mt. length

H102

Straight fitting

H103

M x F reducer

H107

Pipe fitting, male thread

H109

Pipe fitting, female thread

H115

Straight tail piece to be welded

H120

Cross over pipe

H121

Cross over pipe

H122

90° Bent fitting

H127

90° Bent fitting, male thread

H129

90° Bent fitting, female thread

H130

90° Elbow female thread solder connection

H139

Wall bracket elbow 90° with female thread

H144

45° Bent fitting

H150

Tee

H151

Reducing tee

H153

Tee male thread

H154

Tee female thread

H163

Plug for the pressure test of the system

H165

End cap

H166

Electrofusion sockets

H173

Stop valve with screw-down shut off

H173A

Stop valve with screw-down shut off

H173B

Stop valve with screw-down shut off

H200

Welding machine with box and accessories

H202

Repair holes die

H203

Set of 20 PP-R plugs

H205

Welding machine for H166

H180

Water hammer damper

Multi-thong press fittings

RM102

Straight fitting

RM103

Reducing straight fitting

RM107

Male straight fitting

RM109

Female straight fitting

RM122

90° elbow, female thread

RM127

90° elbow, male

RM129

90°elbow, female thread

RM139

90° elbow with wall bracket

RM144

45° bend

RM128

90° elbow

RM150

Tee fitting

RM151

Reducing tee fitting

RM153

Tee fitting

RM154

Tee fitting

RM179SP

Straight adaptor, hexagonal nut and flat washer

RM179

Straight adaptor, nickel plated with nut for adaptor

RM18

Straight adaptor, with nut for adaptor

RM19

90° elbow adaptor in 3 pieces

RM173

Stop valve with screw-down shut off and RM connections

RMV103

Straight fitting with press connection for copper pipe

Mechanical compression adaptors and fittings

R187M

Male fitting for multilayer or synthetic pipes

R187F

Female fitting for multilayer or synthetic pipes

R560AM

Straight fitting

R561AM

90° elbow fitting

R562AM

90° elbow fitting

R563AM

90° elbow fitting

R564AM

Tee fitting

R566AM

Fitting

R568AM

Tee fitting

R569AM

Tee fitting

R572AM

90° elbow fitting with wall bracket

R180M

Male fitting

R180F

Female fitting

R560

Straight coupling copper-copper connections

R561

Elbow copper-copper connections

R562

Elbow copper-M connections

R563

Elbow copper-F connections

R564

Tee copper tube connections

R568

Tee copper-copper-M connections

R569

Tee copper-copper-F connections

R572

Angle fittings with wall bearing

Manifolds

R580C

Modular manifolds without stop valve

R585C

Modular manifolds with stop valve

R580M

Modular manifold with bayonet connection

R580T

Pair of end modular manifolds with bayonet connection

R585M

Modular manifold, with bayonet connection, with interception valve

R585T

Pair of end manifold, with bayonet connections, with interception valve

Ball valves

R950

Full port ball valve, heavy series

R951

Full port ball valve, heavy series

R910

Full port ball valve

R911

Full port ball valve

R914L

Male x female full port ball valve

R914

Male x female, full port ball valve

R913L

Male x male full port ball valve

R913

Male x male full port ball valve

R919

Valve with DADO new generation ball

R789

Angle ball valve

R850

Full port ball valve

R851

Full port ball valve

R851TH

Full port valve with extended handle

R854

Female x male full port ball valve

R859

Full port ball valve with tail piece

R850VW

Ball valve, press fittings connections

R850VWS

Ball valve, female press-connections

R851VT

Ball valve, press fittings connections

R851VTS

Ball valve, female press-connections

R853VT

Ball valve, male press-connections

R853VWL

Ball valve, male press-connections

R854VT

Ball valve, female press-connections

R854VWL

Ball valve, female press-connections

R859VT

Ball valve, male press-connections

R250D

Standard port ball valve

R251D

Standard port ball valve

R251TH

Standard port ball valve, with extended handle

R254DL

Male x female standard port ball valve

R254D

Male x female standard port ball valve

R253DL

Male x male standard port ball valve

R253D

Male x male standard port ball valve

R259D

Standard port ball valve with tail piece

R251P

Ball valve female-female, specific for the connection of the meters

R254P

Ball valve male-female, specific for the connection of the meters

R752

Ball valve with adjustable tail piece, specific for the connection of the meters

R287

Ball valve with connection for temperature gauge and compression connection to suit differential uni

R287M

Couple of ball valves with female-female connections with nut

R602

Gas ball valve female x female connections

R603

Ball valve with tail piece, female-male

R604

Ball valve, square stop, female-male

R608

Drain tap male connection

R608D

Drain tap male connection with handle

R609

Drain tap male-female connections

R610

Drain tap male-male connections

R611

Drain tap female-female connections

R612

Drain tap male-adaptor connections

R619

Quarter turn hose union tap

R620

Bib tap with hose connection

R621

Bib tap with hose connection

R622

Manual draining hose connection vacuum breaker

Documentation

Catalogues and leaflets

IW0002 - Modular manifold R580C and R585C

Technical focus

Coming soon. We are currently working on documentation related to this topic.

Certifications

Visit our Download Area to view and download our certifications and homologations.

Proiecte pe mapamond

Show all